The XPOWER B-4 Mobile Pro Force Dryer comes with a single low vibration, balanced motor and improved carbon brush design that produces at least 40% less noise than our nearest competitor. Drawing only 10 amps of power at max speed, the Mobile Pro 3 HP single motor force dryer features variable speed control and is preferred by novice groomers who want precise control in airflow for the toughest large breeds to the smallest and most timid toy breeds,

Features:

Priced at the lowest cost for a variable speed pet dryer that offers portability, quietness, low power usage, and high job effectiveness

Constructed with durable and lightweight ABS plastic, the B-4 pet dryer comes complete with three secure screw-on styling nozzles and an 8 Ft. long x 1.7 inches diameter high flex thermal hose

A washable 3-filter system keeps the motor operating at top efficiency and is easily accessible through the screw-off end cap

B-4 is compatible with the Wall Mount Kit (WMK-2) forconvenient storage, as well as the multiple position tilt capable Stand Mount Kit (SMK-3) with Stand Conversion Arm (SCA) to convert to a hands-free dryer

With a one year limited manufacturer warranty, the XPOWER B-4 Mobile Pro Force Dryer is precision engineered for many years of service

Includes:

1- Pet Dryer

1- Hose 3-Screw-on nozzle attachments

1-Extra Filter Set

1-Owners Manual

Intended Pet(s): Dogs
Pet Weight: All Sizes
Product Dimensions:
Product: 14 in x 6.5 in x 9.5 in
Packaging Box: 16.5 in x 10.4 in x 11 in
Product Weight: Product: 10.8 lbs; Packaging Box: 12.2lbs
Directions:
Operation:
Screw the hose into the air outlet of the dryer. Screw the desired nozzle in nozzle adapter to the end. Before Turning on the Pet Dryer: Please hold the hose tightly and point the nozzle outlet to a safe area. Speed Switch: Turn to OFF position to switch the Pet Dryer off. Turn to any speed position to switch the Pet Dryer ON. Turn clockwise to set the desired speed. All units in use must be supervised at all times.

Product Maintenance:
Frequent maintenance is recommended on this appliance. Failure to follow the maintenance instructions may cause failure of the appliance and void the warranty. When not in use, unplug and store the appliance in a dry and cool indoor place. Make sure it is out of reach of children. Before performing any maintenance or cleaning, always disconnect the Pet Dryer from its power source. Use a damp cloth to wipe the surface of the housing. Do not clean the unit with water directly. Check if the grille covers are clean. Remove dirt or any other objects that could block the air inlet and air outlet. Check if the nozzles are clean. Remove dirt or any other objects that could block the nozzle. Store the nozzle in a sealed container and put the container in a dry and cool indoor place. Make sure it is out of reach of children. Three filters are on rear (intake) of the machine. To ensure the best performance, you should clean or replace the filters frequently. (See Also Page 5: Parts Description). Follow the below instructions to take out the filters:

1. Take out the intake filter right from the end of the Pet Dryer.
2. Screw off the rear cover.
3. Take out the motor filter from the machine.
4. Screw off the dust proof cover from the rear cover.
5. Take out the case filter from the dust case.

Caution: When using electrical appliances, especially when children or animals are present, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including, but not limited to the following:

DO NOT use attachments not intended for use with the dryer. Only use attachments recommended or sold by the manufacturer.

DO NOT attempt to perform any service or maintenance not outlined in instruction manual.

WARNING: To reduce the risk of electric shock - Use indoors only. DO NOT use outdoors.

WARNING: This Pet Dryer is not intended for use by children. Adult assembly and operation required. To reduce the risk of injury, close supervision is necessary when an appliance is used near children.

DO NOT use as a toy.

DO NOT leave appliance when plugged in. Unplug from outlet when not in use and before servicing.

DO NOT use extension cords with dryer.

DO NOT unplug unit by pulling on cord, to unplug, grasp the plug, not the cord.

WARNING: Never use dryer with a damaged cord or plug, or after the appliance malfunctions or is dropped, damaged. Return to an authorized service center for service, examination, repair, or electrical or mechanical adjustment.

To disconnect, turn all controls to the off ("O") position, then remove plug from outlet.

DO NOT pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. DO NOT run appliance over cord. Keep cord away from heated surfaces.

DO NOT handle plug or appliance with wet hands.

Use extra care when cleaning on stairs.

DANGER: DO NOT expose dryer to rain or water.

DO NOT use or store dryer where it can fall or be pulled into tub or sink or standing water. If dryer falls into water, unplug it, DO NOT reach into the water. Keep units out of baths and DO NOT operate on a wet floor, or wet surface.

DO NOT use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present. DO NOT pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

Unplug before connecting nozzles and hose.

WARNING: DO NOT put any object into dryer openings. Keep loose clothing, jewelry and hair away from dryer openings. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow. WARNING: DO NOT allow any material to clog orblock air intakes as this may cause units to overheat and result in a fire or electrical hazard. Regularly clear hair or other substances from air intakes. DO NOT contact moving parts.

Connect to a properly grounded outlet only. See Grounding Instructions

DANGER:
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor. If repair or replacement of the cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal. Check with a qualified electrician or serviceman if the grounding instructions are not completely understood, or if in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

This appliance is for use on a nominal 115V circuit (NEMA 5-15R or NEMA 5-20R), and has a grounding plug (NEMA 5-15P or NEMA 5-20P) as illustrated below. Make sure that the appliance is connected to an outlet having the same configuration as the plug. No adapter should be used with this appliance.

$0 - $50+

Labor Day Deals